2019 Land Pride RC5615 Series 2

Call for Price

Land Pride
RC5615 Series 2



Smooth on top. Smooth on bottom.

Land Pride’s RC5615-2 features a smooth top for easy cleaning and a smooth bottom for better airflow and less caked-on debris. Contractors and roadsidemaintenance crews will enjoy the sliding center shield, driveline end-capgrease zerks, and easy-off wing shields that all combine to make maintenance

fast and efficient – less time maintaining means more time mowing. Standardfeatures like the heavy-duty dishpan, replaceable side skirts and skid shoes,and LED transport lights add value.

  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested to meet rigorous voluntary testing procedures according to ISO 4254-13.
  • Factory assembled: Saves customer set-up time and money.
  • 7 Year gearbox warranty: Shows confidence in gearbox integrity. (Years 6 & 7, parts only.)
  • Rugged heavy built gearboxes: Capable of handling heavy cutting applications.
  • Gearbox Seal Protection: Gearbox bottom seal protection for longer bearing life.
  • 2 3/8" Output gearbox shaft: Large output shaft handles shock loads better.
  • 2 Piece shield on wing gearboxes: Driveline grease zerks are easier to access.
  • Self-leveling hitch: Reduces drawbar wear by keeping hitch level while going through ditches.
  • Low hitch weight on tractor tongue: Ideal for smaller HP tractors by reducing the amount of weight on the drawbar.
  • Narrow A-frame hitch: Allows for a tighter turning radius.
  • Adjustable park jack angle: Park jack can be adjusted to be perpendicular to the ground.
  • Adjustable driveline hanger: Serves as a support rest for the driveline when the cutter is unhooked from the tractor. Assist operator when attaching driveline to tractor PTO shaft.
  • Input driveline: Cat. 6 CV or Cat. 5 Conventional: Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
  • Drivelines with slip-clutches: Cat 4 standard Driveline is sized right for the intended cutting capacity. Slip-clutches will slip under load to minimize twist damage to driveline profiles.
  • Grease zerks on end caps of driveline cross journals: Intermediate and wing driveline cross journals are easier to grease. All drivelines have access holes for greasing U-joints and inner profiles.
  • High blade tip speed: Allows clean cutting of material and even distribution.
  • 6" Blade overlap: Eliminates skipping during turns.
  • High cutting capacity: Can cut brushy areas with saplings up to 4" with 56 Series and 4 1/2" with 66 Series.
  • 10 Gauge smooth deck top: Reduces accumulation of debris and is easier and faster to clean.
  • 7 Gauge smooth deck bottom: Heavy deck design holds up to harsh conditions. No bottom obstructions.
  • Replaceable 1/4" side skirt: Reduces debris piercing possibilities. Can be replaced if damaged.
  • Left wing rotates clockwise: Better discharge of material. Picks up tractor tracks.
  • 3/16" Stump jumper backed with a 1" thick mounting bar: Heavy round stump jumper: Can hold up to tough conditions.
  • Beveled skid shoes on wings: Reduces gouging the ground when turning.
  • LED Signal lights: LED lights are bright, long lasting, and resistant to vibration, unlike incandescent counterparts
  • Collapsible leveling rods: Prevents damage and failure to leveling rods.
  • 1" Leveling rods: Large diameter leveling rods provide superior supporting strength over rough terrain.
  • 10 Gauge smooth deck top: Reduces accumulation of debris and is easier and faster to clean.
  • 7 Gauge smooth deck bottom: Heavy deck design holds up to harsh conditions. No bottom obstructions.
  • Replaceable 1/4" side skirt: Reduces debris piercing possibilities. Can be replaced if damaged.
  • Beveled skid shoes on wing deck: Reduces gouging the ground when turning.
  • Hinged wing sections: Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
  • Greasable wing folding hinges: Provides for a long hinge life and allows wings to fold up and down with less stress
  • 1" Solid hinge rods: Gives greater strength to the cutter from front to rear, and in the hinge area itself.
  • Wing transport lock: Holds transport wing in the folded-up position in case of hydraulic pressure loss.
  • Collapsible 1" leveling rods: Prevents damage and failure to leveling rods. Large diameter leveling rods provide superior supporting strength over rough terrain.
  • Enclosed dual leveling rods: Cutter pulls equally on the rear axle while traveling over rough terrain.
  • 5-Bolt hubs: 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
  • Drain holes in wheel rims: Allows water to drain from wheels mounted on folded-up wing. Helps prevent paint deterioration and rusting to the wheel rims.
  • Spring-cushioned trailing arms: Provides independent suspension, cushions loads on drawbar.
  • Replaceable wheel spindles: Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove one bolt to replace damaged spindle.
  • Wheel options: Laminated tires: Eliminates flats; Air-filled tires: Give better cushion while transporting; Foam-filled tires: Give better cushion while transporting and can’t go flat.
  • LP Performance hitch option: Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.
  • Bar-tite hitch option: Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
  • Roadway light kit option: Allows operator to transport on public roads safer when head lights are turned on and/or when flasher lights are turned on.
  • Deck ring option: Keeps blades from damaging the deck.
  • Horsepower range: 50 to 250 hp (37.3 to 186.4 kw)
  • Gearbox horsepower: 250 hp (186.4 kw) Splitter, 210 hp (156.6 kw) Center & Wing
  • Gearbox lubrication: Gear lube 80-90W EP
  • Gearbox oil capacity: 5.5 Pints (2.60 L): Divider gearbox, 10 Pints (4.73 L): Center deck, LH deck & RH deck spindle gearboxes
  • Cutting capacity: 4" (10.2 cm)
  • Tongue weight: 1,860 lbs (843.7 kg)
  • Machine weight: Single row chain guards, 6 aircraft wheels, 540 CV main driveline & standard clevis hitch, 5446 lbs (2470.3 kg)
  • Blade tip speed: at 540 rpm Center blades = 16,300 FPM (82.8 mps) Wing blades = 16,300 FPM (82.8 mps)
  • Hitch types: Optional Self-Leveling Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Pintle Hitch, or Ball Hitch, Hitch jack Standard (7,000 lbs)(3175.1 kg)
  • Signal lights: 7 Pin connector LED, SAE J560 pin configuration
  • Cutting width: 15' - 0" (4.57 m)
  • Overall width: 15' - 11 3/4" (4.87 m)
  • Normal transport width: 9'-1" (2.77 m)
  • Minimum transport width: 7'-6" (2.29 m) With transport locks & deflectors removed and cylinders fully retracted
  • Overall length: 16' - 0" (4.88 m)
  • Deck height: 12" (30.5 cm)
  • Cutting Height: 2" to 14" (5.1 cm to 35.6 cm)
  • Lift hydraulics: 3 1/2" Bore x 8" stroke hydraulic cylinder, hoses, fittings & stroke control spacers
  • Wing hydraulics: 3" Bore x 8" stroke hydraulic cylinders, hoses & fittings
  • Wing Transport protection: Wing transport lock pins
  • Deck material: 10 gauge (3.4 mm) top deck and 7 gauge (4.6 mm) bottom deck
  • Side skirt material: Bolt-on replaceable 1/4" (6 mm) steel
  • Skid shoes: Wing deck, Reversible & replaceable, 2 straight skid shoes and 2 AR400 leading skid shoes Center deck,2 skid shoes, Replaceable
  • Blades - 6: (2 per carrier) 1/2" x 4" (1.3 cm x 10.2 cm) Heat treated free swinging alloy steel with up lift
  • Blade overlap: 6" (15.2 cm)
  • Blade bolt: Keyed with hardened flat washer & locknut
  • Stump jumper / blade holder: 3/16" (5 mm) Thick round dish-shaped pan, reinforced with 1" x 5" (2.5 cm x 12.7 cm) blade bar; or optional shredder kit
  • Deck ring: Optional 1/2" x 3" (1.3 cm x 7.6 cm) Fully welded
  • Front & rear guards: Optional rubber, single chain, double chain, or double chain with cable
  • Input driveline: 540 & 1000 rpm Cat. 6 with constant velocity u-joint or Cat. 5 with conventional (non-cv) u-joint
  • Intermediate driveline: Category 5 star profile with slip-clutch
  • Wing drivelines: Category 4 star profile with slip-clutch or optional Cat. 5 w/slip clutch
  • Tire Options: 6" x 21" Laminated tires, 25.5" new tire with or without foam fill, 29" x 16 ply used aircraft tires without foam filling.
  • Number of wheels: 6 - Wheel option: 4 on transport Axle and one on each wing axle; 8 - Wheel option: 4 on transport axle and two on each wing axle
  • Transport axle: Spring-cushioned on trailing arms
  • Hubs: Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts



Working Width
15 ft. (4.57 m)
15 ft. 11-3/4 in. (4.87 m)
16 ft. (4.88 m)
5,446 lb. (2470.3 kg)
Recommended HP
50-250 hp (37.3 to 186.4 kw)

Related Products